Advanced inspection
- CMM, laser scanning, optical comparator
- Inspection methods selected based on feature criticality
- All suppliers have in-house QC and inspection teams
Aerospace & Defense Manufacturing
Qualified, traceable, secure manufacturing.
Aerospace and defense programs need qualified manufacturing partners. Vendra brings a network of vetted, U.S.-based shops that meet your certification and program requirements.
Trusted across aerospace, defense & space programs
Supplier profile
100% U.S.-based manufacturers
01 · TIERS & QUALIFICATION
Two layers of vetting before a job hits the floor.
Every manufacturer is matched to your program needs, whether it's quick-turn prototype parts or flight hardware destined for outer space.
Supplier Certifications
- ITAR: For ITAR compliant hardware
- AS9100D: For flight hardware
- ISO 9001: For prototype hardware
- Specialized Certifications: ISO 13485, NQA-1 enforced as needed
- EAR Compliance: EAR 99, EAR 9A515, and additional ECCNs enforced as needed
Supplier Qualification
- Controlled test parts with defined critical-to-quality features (GD&T, finishes, etc.)
- Independent CMM inspections and validation of test parts against drawing requirements
- Manufacturer capabilities, machines, and inspection equipment reviewed in in-person line visits and audits
- Demonstrated experience with aerospace, defense, satellite, and nuclear programs
Production statistics
Proven execution, measured in real parts.
10,000+
Parts delivered across A&D
>99%
On-time delivery
<1%
Rework and rejection rate
<24h
Quote turnaround for RFQs
Manufacturing capabilities
Precision processes for tight-tolerance, mission-critical work.
02 · CNC MACHINING
Precision milling and turning for tight-tolerance work.
Nominal ±0.003" with controlled features held to ±0.0001". Build envelopes scaled for satellite-bus and structural work.
CNC Milling
- 3-axis, 4-axis, 4+1-axis, 5-axis milling
- General tolerance: ±0.003"
- Tight tolerances down to ±0.0001" on controlled features
- Build envelope up to 120" on the largest axis
3-axis4+15-axis±0.0001"
CNC Turning
- Typical max working diameter: up to 36"
- Typical max working length: up to 72"
- General tolerance: ±0.003"
- Tight tolerances down to ±0.0001" on controlled features
Ø 36"L 72"±0.0001"
03 · SPECIALTY MACHINING
Specialized processes for complex features and finishes.
EDM, grinding, and Swiss work for features standard mills and lathes can't reach.
EDM & Grinding
- Wire EDM: typical tolerance ±0.0001"
- Sinker EDM: typical tolerance ±0.0001"
- Surface grinding and honing (precision & cylindrical on ID/OD)
Swiss & Specialty Turning
- Screw machining
- Swiss lathe / Swiss screw machining
- Spline and gear hobbing
04 · FINISHING & ASSEMBLY
Standard and specialty finishing, performed by approved processors.
Every special process is run by a Nadcap- or program-approved processor, with certs flowed back on the C of C.
Standard finishing
- Anodizing: Type II and Type III Hardcoat
- Chemical conversion: Chem Film, Alodine, Chromate
- Nickel and electroless nickel plating
- Thermal treatments
- Helicoil and insert installation
- Additional common aerospace finishing & secondary ops
Specialty processes
- Masking and selective processing for critical interfaces
- Solid film lubricants, PTFE systems, and anti-galling treatments
- Mfr- or customer-specific finishes such as Alion MH-2200, BR-127, Tiolube Dry Film Lubricant
All special processes performed by approved processors, with certifications provided.
Quality, traceability & inspection
Documentation and inspection rigor matched to feature criticality.
Documentation & traceability
- Certificate of Conformance
- Material, finish, and process certificates (incl. DFARS compliance)
- Standard and formal inspection reports
- AS9102 First Article Inspection reports
- Custom inspection (NDT, ink penetrant testing)
Nonconformance & corrective action
- Documented Nonconformance Reports (NCRs) for any deviation
- Root cause and corrective action tracked and retained
- No rework or use-as-is without customer approval
ITAR & security
Export-controlled data, gated access, and US-person compliance.
Vendra is ITAR registered and structured for export-controlled programs end-to-end, from RFQ to delivery.
CAGE Code11FY0
Export requirements are flowed down contractually to all applicable suppliers.
- Export-controlled technical data accessible only to U.S. persons
- Supplier access gated by export classification at RFQ and PO release
- Controlled file access, logging, and revocation
- Infrastructure hosted on AWS GovCloud for controlled data
Additional processes
Beyond machining: additive, sheet metal, and more.
Additive manufacturing
FDM, SLS, SLA, MJF, DMLS in various metals and plastics. Post-processing and finishing options available.
Sheet metal & fabrication
Laser cutting and water jetting of metal and plastic sheets. Insert installation, welding, and custom finishing available.
Coming soon
PCB fabrication & assembly
Board fabrication and assembly capabilities are being added to the network. Reach out if you have an upcoming program.
Ready when you areWe're ready to support your engineering,
We're ready to support your engineering,
supply chain, and quality teams.
Submit a controlled RFQ today, or book time with our aerospace sourcing team to walk through your program.